Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate Panel of the Holden Trax?

Model: Chevrolet Trax MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Door trim panel

Video tutorial

In this tutorial, you will see how to remove the tailgate panel of the Holden Trax, a very simple and quick operation. First, open the trunk.

Then, using a plastic trim tool to avoid leaving marks, pry off the upper panel. Next, remove the two side pillars and move on to the main panel, which also needs to be pried off with the trim tool.

To reassemble everything, follow the reverse order and be careful not to damage the fastening clips, as they are quite fragile.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How the Automatic Tailgate Works on the Holden Trax
How the Automatic Tailgate Works on the Holden Trax
Chevrolet Trax (2013-2020 / MK 1) How the fully automatic rear tailgate works on the Holden Trax. Simply touch the external handle, and the tailgate lifts, signaling its movement with…
How to Replace the Front Bulb on a Holden Trax
How to Replace the Front Bulb on a Holden Trax
Chevrolet Trax (2013-2020 / MK 1) In today's video, we will show you how to replace the headlight bulb on a Holden Trax. This video also applies to its twin, the Chevrolet Trax, and t…
How to Change the Engine Oil in a Holden Trax?
How to Change the Engine Oil in a Holden Trax?
Chevrolet Trax (2013-2020 / MK 1) To change the engine oil in the Holden Trax, access the underside of the engine bay where the engine oil drain plug is located. This must be unscrewe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos