Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How the Automatic Tailgate Works on the Holden Trax

Model: Chevrolet Trax MK 1 - Years 2013-2020

How the fully automatic rear tailgate works on the Holden Trax. Simply touch the external handle, and the tailgate lifts, signaling its movement with an audible alert when it stops. Inside, on the right, there is another button to press, and the vehicle performs the same operation in reverse. This can also be done from the inside, using a specific button on the right side of the steering column (this is a right-hand drive vehicle). But these operations can also be performed from the remote control by simply pressing the button on the left four times in a row. The tailgate will open or close.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Tailgate Panel of the Holden Trax?
How to Remove the Tailgate Panel of the Holden Trax?
Chevrolet Trax (2013-2020 / MK 1) In this tutorial, you will see how to remove the tailgate panel of the Holden Trax, a very simple and quick operation. First, open the trunk. Then, u…
How to Replace the Exterior Door Handle on the Holden Trax?
How to Replace the Exterior Door Handle on the Holden Trax?
Chevrolet Trax (2013-2020 / MK 1) To replace the exterior door handle on the Holden Trax, open the door so you can detach the circular rubber piece on the side of the door. Once this …
How to Change the Engine Oil in a Holden Trax?
How to Change the Engine Oil in a Holden Trax?
Chevrolet Trax (2013-2020 / MK 1) To change the engine oil in the Holden Trax, access the underside of the engine bay where the engine oil drain plug is located. This must be unscrewe…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos