Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Door Handle on the Holden Trax?

Model: Chevrolet Trax MK 1 - Years 2013-2020
Part: Handle

To replace the exterior door handle on the Holden Trax, open the door so you can detach the circular rubber piece on the side of the door. Once this is removed, unscrew the underlying screw and pull the lock of the handle from its housing. When the lock is removed, you can detach the handle that needs to be replaced with a new one. This way, you can reinsert the lock, securing it with its side screw.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Holden Trax?
How to Change the Engine Oil in a Holden Trax?
Chevrolet Trax (2013-2020 / MK 1) To change the engine oil in the Holden Trax, access the underside of the engine bay where the engine oil drain plug is located. This must be unscrewe…
How to Replace the Front Bulb on a Holden Trax
How to Replace the Front Bulb on a Holden Trax
Chevrolet Trax (2013-2020 / MK 1) In today's video, we will show you how to replace the headlight bulb on a Holden Trax. This video also applies to its twin, the Chevrolet Trax, and t…
How the Automatic Tailgate Works on the Holden Trax
How the Automatic Tailgate Works on the Holden Trax
Chevrolet Trax (2013-2020 / MK 1) How the fully automatic rear tailgate works on the Holden Trax. Simply touch the external handle, and the tailgate lifts, signaling its movement with…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos