Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Elite 110

Honda Elite 110 - Video guides

Honda Elite 110
How to replace the engine oil in the Honda Elite 110 scooter?
In this tutorial, we will see how to replace the engine oil in the Honda Elite 110 scooter, a very simple and quick operation. First of all, let's make sure …Read all…
Posted on 9 December 2025 by ScegliAuto
Honda Elite 110
How do you replace the air filter of the Honda Elite 110?
It will be possible to replace the air filter of the Honda Elite 110 by removing the panel located on the left side of the motorcycle, just behind the …Read all…
Posted on 1 August 2025 by ScegliAuto
Honda Elite 110
How to Replace the Ignition Switch on the Honda Elite 110
To replace the ignition switch on the Honda Elite 110, you need to completely remove the front fairing of the bike by unscrewing the screws and unclipping the …Read all…
Posted on 12 September 2026 by ScegliAuto
Honda Elite 110
How to Replace the Spark Plug on the Honda Elite 110 Scooter?
As shown in this tutorial, replacing the spark plug on the Honda Elite 110 scooter is a very simple and quick task. First, ensure the key is not inserted, then …Read all…
Posted on 18 August 2026 by ScegliAuto
Honda Elite 110
How to Replace the Battery of the Honda Elite 110?
To replace the battery of the Honda Elite 110, loosen the screws securing the front panel of the motorcycle: these screws are located on the inner side of the …Read all…
Posted on 13 July 2026 by ScegliAuto

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos