Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
As shown in this tutorial, replacing the spark plug on the Honda Elite 110 scooter is a very simple and quick task. First, ensure the key is not inserted, then extend the right footrest, unscrew the screw located behind it, and remove the plastic panel. Next, locate the spark plug, disconnect the ignition lead, and unscrew it using a 16mm socket. Finally, insert the new spark plug, screw it in without applying excessive force, reconnect the lead, and reattach the protection panel.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Honda Elite 110 scooter?
How to replace the engine oil in the Honda Elite 110 scooter?
Elite 110 In this tutorial, we will see how to replace the engine oil in the Honda Elite 110 scooter, a very simple and quick operation. First of all, let's ma…
How do you replace the air filter of the Honda Elite 110?
How do you replace the air filter of the Honda Elite 110?
Elite 110 It will be possible to replace the air filter of the Honda Elite 110 by removing the panel located on the left side of the motorcycle, just behind th…
How to Replace the Ignition Switch on the Honda Elite 110
How to Replace the Ignition Switch on the Honda Elite 110
Elite 110 To replace the ignition switch on the Honda Elite 110, you need to completely remove the front fairing of the bike by unscrewing the screws and uncli…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos