Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Honda Elite 110 scooter?

Model: Honda Elite 110
Part: Engine oil

Video tutorial

In this tutorial, we will see how to replace the engine oil in the Honda Elite 110 scooter, a very simple and quick operation. First of all, let's make sure that the engine is cool enough, after which we position a container underneath it, locate the drain hole bolt, and unscrew it using a 17mm socket wrench.

Next, let all the oil contained in the system drain out, unscrew the filter cap, and clean the filter of any dirt residue. At this point, all that's left is to reassemble everything and add the necessary amount of oil through the designated hole.


Posted on 8 December 2025 by ScegliAuto


Related tutorials

How do you replace the air filter of the Honda Elite 110?
How do you replace the air filter of the Honda Elite 110?
Elite 110 It will be possible to replace the air filter of the Honda Elite 110 by removing the panel located on the left side of the motorcycle, just behind th…
How to Replace the Spark Plug on the Honda Elite 110 Scooter?
How to Replace the Spark Plug on the Honda Elite 110 Scooter?
Elite 110 As shown in this tutorial, replacing the spark plug on the Honda Elite 110 scooter is a very simple and quick task. First, ensure the key is not inse…
How to Replace the Ignition Switch on the Honda Elite 110
How to Replace the Ignition Switch on the Honda Elite 110
Elite 110 To replace the ignition switch on the Honda Elite 110, you need to completely remove the front fairing of the bike by unscrewing the screws and uncli…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos