Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake and Clutch Levers on the Honda CBR 600RR

Model: Honda Cbr 600 Rr
Part:

Video tutorial

Today's instructions will show you the procedure for removing and replacing the brake and clutch levers on the Honda CBR 600RR motorcycle. First, place the motorcycle on a stand and begin by removing the clutch lever; loosen the cable adjuster and unscrew the pivot bolt of the lever, completely removing the clutch lever.

For the brake lever, simply unscrew the bolt to remove it and replace it with the new one, then adjust the travel; finally, adjust the clutch disengagement using the adjuster!


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Adjust the Clutch on the Honda CBR 600RR?
How to Adjust the Clutch on the Honda CBR 600RR?
Cbr 600 Rr To adjust the clutch on the Honda CBR 600RR, adjust the bolts located near the clutch lever and near the clutch cover: by tightening these bolts, you…
How do you replace the clutch of the Honda CBR 600RR?
How do you replace the clutch of the Honda CBR 600RR?
Cbr 600 Rr It will be possible to replace the clutch that is installed on the Honda CBR 600RR by loosening the screws that secure the trim panel to its housing,…
How to replace the rear brake pads on the Honda CBR 600RR?
How to replace the rear brake pads on the Honda CBR 600RR?
Cbr 600 Rr To replace the rear brake pads on the Honda CBR 600RR, you need to loosen the bolts that secure the caliper to the brake disc. Once the bolts are loo…

How to Change the Engine Oil on a Kymco Xtown 300?

To change the engine oil on a Kymco Xtown 300, loosen the drain plug of the oil reservoir, located at the central lower part of the bike: once loosened, you can collect the engine oil in a suitably positioned container. After all the oil has drained, you can also remove the oil filter from underneath and replace it with a new spare part; then, top up by adding the new oil through the filler located on the right side of the bike, near the exhaust.

Watch the video!


by ScegliAuto

More videos