Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Pcx 125
Part: Clock

Usually one of the reasons why the clock resets for a few seconds and then reappears not updated, is the disconnect of the 12-volt power supply battery of the moped, for example when it is replaced. Luckily, we can make these settings ourselves, there is no need to go to the workshop, so here's how to do it: press the two buttons at the ends of the instrument panel at the same time to access the clock, in fact we will see it flashing. After this, with the first button from the left we will adjust the Hours and then the Minutes, while with the first button from the right we will save the changes.

Posted on 30 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Time on the Honda PCX 125
How to Change the Time on the Honda PCX 125
Pcx 125 To manually change the time displayed on the instrument panel of your Honda PCX 125, it only takes a few seconds. Once you have placed your Honda PCX…
How to Change the Time on a Honda PCX 125 - 160
How to Change the Time on a Honda PCX 125 - 160
Pcx 125 Here are the instructions to change and set the time on the Honda PCX 125 and PCX 160 scooters. First, place your scooter on the centre stand and tur…
How to change the time on a Honda PCX 125
How to change the time on a Honda PCX 125
Pcx 125 In this video, we see how to change the time on a Honda PCX 125: we turn on the ignition by turning the key in the ignition switch, and then we press…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos