Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Pcx 160
Part: Battery

The instructions in this guide will show us how to disassemble and replace the battery of the Honda PCX 160 scooter. First, we put the scooter on the center stand and begin to open the seat, accessing the compartment under the seat; then we remove the plastic cover to access the battery, subsequently disconnecting both terminals (positive and negative), as shown in the video. At this point, we remove and install the new battery, of the correct type and with the same amperage; we reassemble and connect the battery, finally fixing the plastic cover.

Posted on 3 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to open the seat on the Honda PCX 160 scooter?
How to open the seat on the Honda PCX 160 scooter?
Pcx 160 In this tutorial we can see how to open the seat on the Honda PCX 160 scooter, an extremely simple and quick operation, to access the storage compart…
How to replace the battery of the Honda PCX 160 scooter remote control?
How to replace the battery of the Honda PCX 160 scooter remote control?
Pcx 160 In this tutorial we can see how to replace the battery of the remote control of the Honda PCX 160 scooter, an extremely simple and quick operation. T…
How to replace the engine oil in the Honda PCX 160 scooter?
Pcx 160 In this tutorial, we can see how to replace the engine oil in the Honda PCX 160 scooter, a very simple and quick operation. First of all, make sure t…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos