Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cb 1000r
Part: Battery

Below we will see the instructions that will allow us to disassemble and replace the battery of the Honda CB 1000R motorcycle. First, let's put the motorcycle on the stand and start by removing the passenger seat and the rider's seat; then we will disconnect both battery terminals (positive and negative), and remove the battery from its compartment, as shown in the video. At this point, we will install the new battery, ensuring it is the correct type and has the same amperage; we will connect it and check the engine ignition before reassembling the rider's and passenger's seats.

Posted on 27 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the exhaust on a Honda CB 1000R
How to replace the exhaust on a Honda CB 1000R
Cb 1000r This guide provides instructions for removing and replacing the exhaust on a Honda CB 1000R motorcycle. First, place the bike on a stand and begin un…
How to Replace the Headlight Bulb on the Honda CB 1000R
How to Replace the Headlight Bulb on the Honda CB 1000R
Cb 1000r Today, we will see how to remove and replace the headlight bulb on the Honda CB 1000R motorcycle. First, place your motorcycle on a stand and start b…
How to Replace the Brake and Clutch Levers on a Honda CB 1000R
How to Replace the Brake and Clutch Levers on a Honda CB 1000R
Cb 1000r Below are the instructions for removing and replacing the brake and clutch levers on the Honda CB 1000R motorcycle. First, place the bike on a stand …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos