Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide provides instructions for removing and replacing the exhaust on a Honda CB 1000R motorcycle. First, place the bike on a stand and begin unscrewing the fixing screws of the exhaust silencer to detach it from the catalyst; then disconnect the catalyst from the exhaust manifold by unscrewing the additional screws, as shown in the video. Next, disconnect the manifolds from the engine by unscrewing the nuts from the studs; replace and install the new exhaust, following the video tutorial to the end!

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Honda CB 1000R
How to replace the battery of the Honda CB 1000R
Cb 1000r Below we will see the instructions that will allow us to disassemble and replace the battery of the Honda CB 1000R motorcycle. First, let's put the m…
How to Replace the Headlight Bulb on the Honda CB 1000R
How to Replace the Headlight Bulb on the Honda CB 1000R
Cb 1000r Today, we will see how to remove and replace the headlight bulb on the Honda CB 1000R motorcycle. First, place your motorcycle on a stand and start b…
How to Replace the Brake and Clutch Levers on a Honda CB 1000R
How to Replace the Brake and Clutch Levers on a Honda CB 1000R
Cb 1000r Below are the instructions for removing and replacing the brake and clutch levers on the Honda CB 1000R motorcycle. First, place the bike on a stand …

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos