Do it yourself
Frequently asked questions about cars and motorcycles
Today, we will see how to remove and replace the headlight bulb on the Honda CB 1000R motorcycle. First, place your motorcycle on a stand and start by removing the front headlight; to do this, remove the clips located at the bottom, as shown in the video. Next, disconnect the electrical connector from the bulb and release the metal clip to remove and replace the bulb with a new one of the correct type and fitting. Install and test the bulb's operation, then reassemble the headlight unit!

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Cb 1000r This guide provides instructions for removing and replacing the exhaust on a Honda CB 1000R motorcycle. First, place the bike on a stand and begin un…
Cb 1000r Below we will see the instructions that will allow us to disassemble and replace the battery of the Honda CB 1000R motorcycle. First, let's put the m…
Cb 1000r Today's procedure shows you how to perform the routine maintenance service by changing the engine oil and oil filter on the Honda CB 1000R. First, pl…

How to Change the Engine Oil in a Keeway Superlight 125?

This tutorial shows how to change the engine oil in a Keeway Superlight 125, a very simple and quick operation to perform every 12 months. First, wait until the engine is sufficiently cool, then position a container underneath the bike, locate the drain bolt, and loosen it using a 17mm spanner. Allow all the oil in the system to drain out, clean any residual dirt, and reassemble everything. Finally, pour the necessary amount of oil through the designated hole, using a funnel if needed.

Watch the video!


by ScegliAuto

More videos