Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cb 1000r
Part:

Below are the instructions for removing and replacing the brake and clutch levers on the Honda CB 1000R motorcycle. First, place the bike on a stand and start by removing the front brake lever; to do this, simply unscrew the screw or pin of the lever, using a second spanner to hold the lower nut in place, as shown in the video. Now install the new front brake lever, adjusting the lever's travel; replace the clutch lever in the same way, adjusting the clutch disengagement.

Posted on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Honda CB 1000R
How to Replace the Front Brake Pads on a Honda CB 1000R
Cb 1000r To replace the front brake pads on a Honda CB 1000R, loosen the 14 mm bolts securing the brake caliper to the brake disc. Once these bolts are loosen…
How to Replace the Headlight Bulb on the Honda CB 1000R
How to Replace the Headlight Bulb on the Honda CB 1000R
Cb 1000r Today, we will see how to remove and replace the headlight bulb on the Honda CB 1000R motorcycle. First, place your motorcycle on a stand and start b…
How to replace the exhaust on a Honda CB 1000R
How to replace the exhaust on a Honda CB 1000R
Cb 1000r This guide provides instructions for removing and replacing the exhaust on a Honda CB 1000R motorcycle. First, place the bike on a stand and begin un…

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos