What are the 5 Essential Elements for Checking and Maintaining the Honda NC 750 X?

Today, you will learn the 5 essential procedures to ensure your Honda NC 750 X has a long life on the road. The first check involves adjusting the headlamp: using a crosshead screwdriver, turn the screw on the left side to raise the beam, and on the right side to lower it. To perform this operation, insert the screwdriver from beneath the cover.

The second check concerns the adjustment of the brake light switch: using a spanner, turn the nut located next to the pedal to increase or decrease the activation speed; turning the nut to the right will increase it, while turning it to the left will decrease it. The third check involves adjusting the handbrake.

To adjust the handbrake, use a 12 mm spanner; by loosening or tightening the nut on the rear wheel, you will have either more or less grip, depending on your personal preference for using the brake.

The fourth procedure is about adjusting the rear suspension. In this case, a mole grip is needed; by rotating the suspension, you can choose whether to have a stiff or soft spring, with 7 options available to select your preference.

The fifth procedure involves cleaning the sump breather. In this case, remove the breather and block it to clean it. Then, you should pull out the plug and allow the fluid to drain before inserting a new plug.