Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Vision 110
Part:

In this video, we will see how to remove the front panel of the Honda Vision 110, which will also allow us to access the battery. In this case, the front panel was poorly fitted, so it was necessary to lubricate the anchoring points of the tabs to avoid breaking them during removal. The YouTuber recommends a series of suitable products for this service and reminds us that the panel should be pulled forward, not upwards, as pulling upwards will surely break the tabs. The lower part requires some force, and lubrication will make subsequent removal easier. Also, in the lower part, there are several small black plastic clips that are easy to break. The YouTuber suggests buying a few extras to replace them if needed.

Posted on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Honda Vision 110?
How to Replace the Headlight Bulb on a Honda Vision 110?
Vision 110 You can replace the headlight bulb on the Honda Vision 110 by loosening the screws that secure the front panel of the motorcycle: once the fastening …
How to Replace the Headlight Bulb on a Honda Vision 110?
How to Replace the Headlight Bulb on a Honda Vision 110?
Vision 110 To replace the headlight bulb on a Honda Vision 110, you need to loosen the screws that secure the front fairing panel. Once the fixing screws are lo…
How to Replace the Battery on a Honda Vision 110
How to Replace the Battery on a Honda Vision 110
Vision 110 To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To l…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos