Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Sh 300
Part: Wheel

Today, we will explain how to remove the rear wheel from the Honda SH 300. Start by removing the exhaust silencer to create enough space to work on the wheel axle. Remove the rear mudguard to access the wheel. For added safety during the job, lock the drum brake. Loosen and then remove the rear axle using a 24mm spanner to unscrew the bolt. Remove the lower mounting bolt of the shock absorber to lower the wheel. Remove the swingarm bolts and loosen the bolts and washers that hold the swingarm to the frame. Remove the side spacers and slide the wheel outwards. Apply grease and insert the wheel, then proceed to reassemble the swingarm by tightening the bolts using the 24mm spanner. Refit the shock absorbers and the mudguard. Finally, reattach the silencer.

Posted on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter of the Honda SH 300?
How to Replace the Air Filter of the Honda SH 300?
Sh 300 To remove the air filter of the Honda SH 300, it is necessary to take off the plastic cover located between the seat and the rear wheel. Once this is…
Where is the battery located on a Honda SH 300?
Where is the battery located on a Honda SH 300?
Sh 300 The battery of your Honda SH 300 powers the scooter's electrical system, including the starter motor when you need to start the engine. The battery i…
How to Replace the Rollers in the Honda SH 300 Variator?
How to Replace the Rollers in the Honda SH 300 Variator?
Sh 300 To replace the rollers in the Honda SH 300 variator, loosen the bolts securing the cover located near the rear wheel on the right side of the motorcy…

How to Reset the Oil Light on a Honda PCX 160

In this mini guide, discover the steps to manually reset the oil light on the central display of your Honda PCX 160. First, turn on the ignition with the key and press both the 'Sel' and 'Set' buttons located below it simultaneously. When the time starts to flash, hold 'Sel' until the oil indicator flashes, then press the 'Set' button once. To complete the reset, hold 'Sel' again until the operation is finished.

Watch the video!


by ScegliAuto

More videos