To position the Termoscud Pro R238Pro on our Honda Forza from 125 to 350 and from 2023 onwards, you may have purchased it for example from 47bikerstore. The reference is: Tucano R238X at the price of £133.44 + unspecified shipping costs. Open the Termoscud and position it on the seat, bringing it close to the handlebars, and secure the straps 1 (left and right) using the original screws of the scooter. At the top of the wheel well, attach strap 3 with the bodywork screw; lift the Termoscud and attach the ends of straps X and 3bis. Secure straps 2bs (on both sides) using the original fasteners of the scooter: press in the centre of the fastener head, pull it out of its housing, remove the inner part and insert it into the strap. Place everything in the original housing and push the stem towards the head to lock it. Now attach strap "Y" under the footboard. Close the fastener on the right side of the vehicle and tighten all straps well. Don't forget to inflate the "sgas", which are the side air chambers that prevent the "wings" of the Termoscud from flapping. They must be inflated by mouth: never with a compressor!