Do it yourself
Frequently asked questions about cars and motorcycles

Engine Oil Change for a Honda CR85

Model: Honda Cr85
Part: Engine oil

Video tutorial

Descriptive guide for changing the engine oil of a Honda CR 85cc. Obtain 1L of Motul 5100 SAE 10W40 oil. Position the bike on a central lift. Start the engine until it reaches operating temperature, then turn it off. Place a container for collecting the oil under the engine.

Using a ratchet and a 13mm socket, unscrew the oil drain plug located under the engine. Let all the oil drain out. Screw the plug back in until fully tightened.

Open the oil filler cap located on the right side of the engine casing and unscrew the 10mm cap in the middle of the casing. Pour in the engine oil until it flows out of the 10mm cap hole.

Re-screw both the 10mm cap and the filler cap.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

Cb 400 In today's tutorial video, we will see how to replace the engine oil and the oil filter, performing the regular maintenance interval, on a Honda CB 4…
Honda Jazz (2008-2013 / MK 2) To replace the engine oil and oil filter on a Honda Jazz, first open the bonnet and then lift the vehicle using a jack to facilitate the oil drainage…
Honda CR-V (2012-2017 / MK 4) How to replace the oil filter on a Honda CR-V? When replacing the filter, it is better to also replace the oil. Lift the car on a jack and unscrew th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Exhaust on a GasGas SM 700?

On the GasGas SM 700, the procedure for replacing the exhaust can be carried out by loosening the screws that secure the right side panel of the corresponding mudguard: once this panel has been completely removed, you will find the exhaust, which can be freed from its seat by loosening the support screws and disconnecting the ring that connects the exhaust to its exhaust manifold. Once the old exhaust has been removed, you can insert the new one into its housing, securing it to the manifold and the side supports.

Watch the video!


by ScegliAuto

More videos