Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Briefly, we will discover the instructions that will allow us to reset the engine warning light or other error lights on the Honda Dax 125. First, put the bike on its stand and open the seat; then locate the red electrical connector of the ECU, disconnect it, and bridge the two pins shown. Now, turn on the ignition and wait for the engine warning light to turn off; switch off the ignition again and reconnect the ECU connector, then start the engine!

Posted on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Chain on the Skyteam Dax 125?
How to Replace the Chain on the Skyteam Dax 125?
Dax 125 You can replace the chain on the Skyteam Dax 125 by breaking it at a point using a chain breaker: once it is broken, you can slide it along all its s…
How to change the engine oil of the Skyteam Dax 125?
How to change the engine oil of the Skyteam Dax 125?
Dax 125 To change the engine oil of the Skyteam Dax 125, loosen the drain plug located at the central lower part of the vehicle. Once this plug is removed, y…

How to Change the Engine Oil in a Triumph Thunderbird?

In this tutorial, you will learn how to change the engine oil in a Triumph Thunderbird, a very simple and quick operation. First, wait for the engine to be completely cold, then place a container underneath it, locate the drain plug, and unscrew it using an Allen key. Once all the oil in the system is collected, unscrew the oil filter housing, install the replacement, and tighten the bolt. At this point, just pour new oil through the upper hole, using a funnel if necessary.

Watch the video!


by ScegliAuto

More videos