Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. :
  3. Hornet 600
    4. : Disassembly of Honda Hornet footpeg pedals

Model: Honda Hornet 600
Part:
Disassembly of Honda Hornet footpeg pedals

In this short video tutorial we will see how to disassemble the pedals of the footboards of a Honda Hornet 600, but also 900 and 1000. First we are going to remove the central pin of the pedal with a pliers: to do this we will remove the stop that we find at the inside of the pin, as in the video. At this point we can remove the gear lever, unscrewing the fixing bolt; to remove the right side pedal, we are going to remove the bolt with a pliers using the same procedure. To reassemble, first insert the clip inside the pedal and then lock it with the pin and the stop, as shown in the video!


Posted on 1 January 2024 by ScegliAuto

Changing the gearbox oil of the Aprilia Rx 50

In this video tutorial we will see how to change the transmission oil of the Aprilia Rx 50 2-stroke enduro motorcycle, following these simple and quick steps. First of all, we put our motorcycle on the stand and begin to unscrew the oil vent bolt that we find under the engine, letting it drain into a container for about ten minutes; after which we unscrew the screws of the oil filter cover, replacing the cartridge with the new one. At this point we unscrew the gear oil filler screw, top up and finally check the transmission oil level!

Watch the video!


by ScegliAuto

More videos