Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on a Honda CB 600F

Model: Honda Cb 600f
Part: Battery

Video tutorial

In this video, you will see the instructions and steps to remove and replace the battery on a Honda CB 600F (Hornet). First, remove the seat of the motorcycle and unscrew the side screws of the plastic fairings; then remove the battery securing strap and take it out of its compartment, as shown in the video.

At this point, simply disconnect the two terminals (positive and negative) using a screwdriver or a socket spanner. Now remove and replace the battery with a new one, following the reverse procedure!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb in the Honda CB 600F?
How to replace the headlight bulb in the Honda CB 600F?
Cb 600f In this tutorial we can see how to replace the headlight bulb in the Honda CB 600F, a very simple and quick operation. First of all, make sure that t…
Replacing the Brake Pads of the Honda CB 600F
Replacing the Brake Pads of the Honda CB 600F
Cb 600f In this video tutorial, you will find step-by-step instructions to remove and replace the front and rear brake pads of the Honda CB 600F motorcycle. …
How to Change the Engine Oil on a Honda CB 600F
How to Change the Engine Oil on a Honda CB 600F
Cb 600f You can change the engine oil on a Honda CB 600F by loosening the drain plug located at the central bottom of the bike: this will allow all the used …

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos