Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the headlight bulb in the Honda CB 600F, a very simple and quick operation. First of all, make sure that the key is not inserted, then locate the two screws on the sides of the headlight and unscrew them using a Torx T30 key. Then grab the headlight, detach it from the frame, disconnect the power connector and remove the rubber cap. At this point, all that remains is to unclip the metal clip, remove the old bulb, insert the replacement and reassemble everything following the reverse procedure.

Posted on 15 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery on a Honda CB 600F
Replacing the Battery on a Honda CB 600F
Cb 600f In this video, you will see the instructions and steps to remove and replace the battery on a Honda CB 600F (Hornet). First, remove the seat of the m…
Replacing the Brake Pads of the Honda CB 600F
Replacing the Brake Pads of the Honda CB 600F
Cb 600f In this video tutorial, you will find step-by-step instructions to remove and replace the front and rear brake pads of the Honda CB 600F motorcycle. …
How to Change the Engine Oil on a Honda CB 600F
How to Change the Engine Oil on a Honda CB 600F
Cb 600f You can change the engine oil on a Honda CB 600F by loosening the drain plug located at the central bottom of the bike: this will allow all the used …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos