Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Cbr 1100

Model: Honda Cbr 1100
Part: Headlight bulb

Unscrew the screws that secure the small glass relative to the windshield and remove the same. To replace the indicators, simply disconnect the small electric cables and unscrew the relative screws that secure them to the rest of the bike. On each side of the front fairing, the one relating to the lighthouse, there is a screw placed at the top and three that fix it laterally: unscrew them all. Finally, placed below the lighthouse and therefore in the internal part of the hull, there are two interlocking fins from which you will have to unhook the entire front fairing where the bulb is placed: at this point, with the whole casing in your hand, you can access from behind and replace the bulb itself.


Posted on 4 January 2024 by ScegliAuto



How to replace the front headlight bulbs in the Honda CBR 600RR?
Cbr 600 Rr In this tutorial, we can see how to replace the front headlight bulbs in the Honda CBR 600RR, an extremely simple and quick operation. First of all,
Headlight bulb replacement on Honda CBR 929 RR Fireblade
Cbr 929 In this video we will see the steps to disassemble and replace the headlight bulb on a Honda CBR 929 RR Fireblade. To access the bulb it is not neces
How do you replace the front headlight bulb of the Honda CBR 300R?
Cbr 300r To replace the headlight bulb of the Honda CBR 300R, you need to access the area between the fork and the front fairing, where the internal protectiv

How to change the engine oil of a Honda CRF 300?

To replace the motor oil of a Honda CRF 300, start by placing the motorcycle on a flat and stable surface. Remove the oil drain plug, located on the bottom of the engine, using a suitable wrench. Allow the old oil to completely drain into an appropriate container. Then, tighten the oil drain plug, making sure it is securely sealed. Proceed to pour the new oil into the engine through the fill cap, which is usually located on the top of the engine. Use a funnel to facilitate the operation and make sure to add the correct amount of oil, as indicated in the owner's manual. After completing the filling, start the engine for a few minutes to allow the oil to circulate and check for any leaks. Finally, turn off the engine and check the oil level, adding more oil if necessary.

Watch the video!


by ScegliAuto

More videos