Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 125 R
Part: Battery

In this video tutorial, you will learn how to remove the battery of a Honda CBR 125 R in simple steps. First, remove the passenger seat using the appropriate key; then remove the fixing bolts of the rider's seat and take it off. At this point, access the battery compartment, where you will unscrew the bolts of the two terminals (positive and negative) to remove it by pulling it upwards, as shown in the video. Finally, replace it with a new, correct type battery, and reassemble everything by following the video tutorial to the end!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Location and Instructions for Replacing the Honda CBR 125 R Battery
Location and Instructions for Replacing the Honda CBR 125 R Battery
Cbr 125 R In this tutorial, you will learn where the battery of a Honda CBR 125 R is located and how to replace it. First, remove the passenger seat; then, usi…
How to Replace the Headlight Bulb on a Honda CBR 125
How to Replace the Headlight Bulb on a Honda CBR 125
Cbr 125 R In this video, we will go through step-by-step instructions to remove and replace the headlight bulb on the Honda CBR 125 R. First, unscrew the screw…
How to Replace the Clutch on a Honda CBR 125?
How to Replace the Clutch on a Honda CBR 125?
Cbr 125 R To replace the clutch on a Honda CBR 125, loosen the screws securing the cover of the casing located on the right side of the bike. Once this cover i…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos