Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Honda
  4. : Today Af67
Unscrew the oil filler cap with the dipstick located on the right side of the scooter, next to the silencer. Remove the cap immediately to allow air to flow into the compartment and prevent a vacuum from forming, which would hinder the subsequent draining of the lubricant. For the same reason, it is advisable to perform the oil change only after running the engine for a few minutes to warm up the used lubricant. Collect the oil in a container and dispose of it properly at recycling centres, then refill with the same amount from the upper hole and you're done.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda CR-V (2002-2007 / MK 2) In this video tutorial, you will learn how to replace the automatic gearbox oil in a Honda CR-V, following the video tutorial and the instructions be…
Honda Honda Various This video also demonstrates how to change the oil in addition to resetting the warning light for a Honda SH 125 scooter. As shown, simply drain the …
Sh 300i Discover the steps to perform the routine maintenance oil change on the Honda SH 300i scooter. First, position your scooter on the centre stand and s…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos