Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Dio
Part: Battery

To begin the operation, obtain a cross screwdriver and unscrew the two front bolts on the driver's side, as clearly shown in the video. Next, move to the front fairing and unscrew the two screws located near the headlights. After this, you can remove this part of the fairing. Now you can see the battery! At this point, simply remove it by unscrewing and then disconnecting the two terminals. Remember, it is advisable to always start by disconnecting the negative terminal and only then move on to the positive. Proceed in reverse order for fitting the new battery.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dio In this tutorial, see how to set the time on the Honda Dio scooter, an extremely simple and quick operation, for example after replacing the battery …
Dio This guide briefly explains how to remove and replace the drive belt on the Honda Dio scooter by following these simple steps. First, place your scoo…
Dio In this tutorial we can see how to replace the engine oil in the Honda Dio scooter, an extremely simple and quick operation, to be carried out every …

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos