Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Honda
  4. : X Blade

Changing the Engine Oil on a Honda X Blade

Model: Honda X Blade
Part: Engine oil

Video tutorial

Using a 5 mm Allen key, unscrew the two lower bolts shown in the video, which secure the lower protection to the engine bay. Remove the protection, then use a 12 mm socket to unscrew the bolt that serves as the drain plug for the oil and collect the oil in a container (ensure to dispose of the used lubricant properly at designated recycling points).

Once all the oil has drained, close the drain plug and add the same quantity of lubricant through the upper cap. It is recommended to use a 10w30 oil and to perform the operation after warming the engine for a few minutes.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

K Blade 125 To change the engine oil on the Keeway K-Blade 125, unscrew the oil drain plug located at the central lower part of the bike. Once the plug is remove…
K Blade 125 To replace the gear oil on the Keeway K-Blade 125, loosen the bolt securing the drain plug of the gear oil reservoir, located near the rear wheel of …
K Blade 125 To change the engine oil on the Keeway K-Blade 125, loosen the drain plug located at the central lower part of the motorcycle. Once loosened, you can…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Exhaust on a GasGas SM 700?

On the GasGas SM 700, the procedure for replacing the exhaust can be carried out by loosening the screws that secure the right side panel of the corresponding mudguard: once this panel has been completely removed, you will find the exhaust, which can be freed from its seat by loosening the support screws and disconnecting the ring that connects the exhaust to its exhaust manifold. Once the old exhaust has been removed, you can insert the new one into its housing, securing it to the manifold and the side supports.

Watch the video!


by ScegliAuto

More videos