Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Vision 50
Part:

In today's video, we will see the main steps that will allow us to disassemble and replace the drive belt of the Honda Vision 50 scooter. First, place the scooter on the centre stand and start by removing the clutch cover, which is located on the left; now unscrew the nut of the fan and the clutch bell to remove them. At this point, you can disassemble and remove the drive belt, replacing it with a new one; insert it correctly and then reassemble the clutch and the fan, following the video tutorial to the end!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil in the Honda Vision 50 scooter?
How to change the engine oil in the Honda Vision 50 scooter?
Vision 50 In this tutorial, you will see how to change the engine oil in the Honda Vision 50 scooter, a very simple and quick operation. First, ensure that the…
How to Replace the Front Brake Pads on a Honda Vision 50?
How to Replace the Front Brake Pads on a Honda Vision 50?
Vision 50 To replace the front brake pads on a Honda Vision 50, loosen the bolts that secure the brake caliper to the brake disc so that it can be completely r…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos