Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Nhx 110
Part:

To replace the variator on the Honda NHX 110, loosen the screws securing the cover near the rear wheel of the bike, allowing the cover to be removed and providing access to the components underneath. Once this is removed, you can loosen the central nut that secures the variator, completely removing it and freeing it from the belt around it. This way, you can insert the new variator, secure it with the nut, and reinsert the belt, sealing everything with the cover.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Nhx 110 To replace the clutch on the Honda NHX 110, loosen the screws securing the transmission cover located on the left side of the bike near the rear whee…
Nhx 110 In order to replace the muffler of the Honda NHX 110, you need to loosen the screws that secure the exhaust terminal to its housing, which is located…
Nhx 110 To replace the air filter on the Honda NHX 110, unscrew the screws securing the left side fairing near the rear wheel. Once removed, you will have ac…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos