How to replace the brake pads on a Honda CBF 125

Model: Honda Cbf 125
Part: Brake pads

This video is currently unavailable

In today's tutorial video, you will learn how to remove and replace the front and rear brake pads on the Honda CBF 125 motorcycle. First, place your motorcycle on the centre stand and start unscrewing the bolts securing the front brake caliper; then remove the caliper from the disc and take out the old brake pads, as shown in the video.

At this point, clean the caliper of dirt and press the piston to retract it; reassemble everything and also replace the rear brake pads, following the tutorial video to the end!

Updated on 25 May 2026 by ScegliAuto

Related tutorials

How to replace the battery in the Honda CBF 125?

Cbf 125 To replace the battery in the Honda CBF 125, insert the ignition key into its lock to turn it and completely remove the seat. Once the seat is remove…

How to Change the Engine Oil on the Honda CBF 125

Cbf 125 You can change the engine oil on the Honda CBF 125 by unscrewing the drain plug of the oil sump located at the central lower part of the bike: once t…

How do you replace the air filter of the Honda CBF 125?

Cbf 125 It will be possible to replace the air filter of the Honda CBF 125 by inserting the ignition key into the lock on the right side of the motorcycle: i…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!

by ScegliAuto

How to replace the brake pads on a Honda CBF 125

Related tutorials

How to replace the clutch lever on the Sherco SEF 300?

More videos