Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. :
  3. Pcx 125
    4. : How to replace the rear light bulb on Honda PCX 125?

Model: Honda Pcx 125
Part: Light bulb
How to replace the rear light bulb on Honda PCX 125?

In order to replace the rear light bulb of the Honda PCX 125 you have to loosen the screws that secure the luggage rack, removing the latter. Once it has been removed, it will also be necessary to unscrew the screws that secure the relative supports and the underlying cover, removing everything. In this way it will be possible to access the connector and the relative bulb by extracting it from its housing. Once the bulb has been removed, it will be possible to disconnect it from the connector and connect the new one by inserting it into the headlight. After installation, the roof rack and relative supports can be re-fitted.


Posted on 10 July 2022 by ScegliAuto



How do you replace the headlight bulb of the Honda PCX 125?
Pcx 125 In order to replace the headlight bulb of the Honda PCX 125, you need to loosen the screws that secure the front fairing of the motorcycle, so that i
How to change the time on the Honda PCX 125?
Pcx 125 To manually change the displayed time on the instrument panel of your Honda PCX 125, it only takes a few seconds. Once you have placed your Honda PCX
How to remove the rear wheel of the Honda Pcx 125
Pcx 125 In this video tutorial we will see how to remove the rear wheel of the Honda Pcx 125 scooter, following the instructions below. First we put the cent

How to change the Harley Davidson Street Glide engine oil and relative filter

The guide shows you how to change the Harley Davidson Street Glide engine oil. The first thing to do is to make the motorcycle safe and unscrew the oil tank cap. At this point, from the bottom of the bike, unscrew the drain plug of the oil pan with a 15mm wrench; allow the oil to flow into a suitable container for disposal. From the left side of the bike, start unscrewing the oil filter and place a plastic bag to collect the oil that comes out. Remove the old filter and clean the housing. Lubricate the gasket on the new filter and install a new O-ring on the drain plug and fit the elements in place. Top up the oil to the correct amount and run the engine. Check the oil level again.

Watch the video!


by ScegliAuto

More videos