Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the exhaust pipe of the Honda PCX 125, you need to loosen the screws that secure it to its housing, which will be located near the rear wheel on the right side. Then you can proceed by loosening the screws that fix the exhaust pipe to the manifold, so that it can be completely removed. Once the old exhaust pipe has been removed, you can place the new one on the right side of the bike, securing it to the supports with the appropriate screws and connecting it to the manifold, in order to verify that everything works correctly.

Posted on 26 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Wheel of a Honda PCX
How to Remove the Rear Wheel of a Honda PCX
Pcx 125 In this video tutorial, see how to remove the rear wheel of a Honda PCX 125 scooter in just a few minutes. Start by removing the exhaust cover by uns…
How to Remove the Rear Wheel of the Honda PCX 125
How to Remove the Rear Wheel of the Honda PCX 125
Pcx 125 In this video tutorial, you will learn how to remove the rear wheel of the Honda PCX 125 scooter by following the instructions below. First, place th…
How to Change the Time on the Honda PCX 125
How to Change the Time on the Honda PCX 125
Pcx 125 To manually change the time displayed on the instrument panel of your Honda PCX 125, it only takes a few seconds. Once you have placed your Honda PCX…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos