Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 600 Rr
Part: Battery

In this video tutorial, you will see how to remove and replace the battery of the Honda CBR 600 RR, following the instructions below. First, remove the rider's seat by unscrewing the screws located on the side edges (using an Allen key); then disconnect both battery terminals (positive and negative) using a 10 mm socket. At this point, remove the battery and replace it with a new one (with the same amperage and dimensions); then reassemble everything!

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine coolant of the Honda CBR 600 RR.
How to replace the engine coolant of the Honda CBR 600 RR.
Cbr 600 Rr These brief and simple steps will allow us to replace the engine coolant of the Honda CBR 600 RR motorcycle. First, we place the motorcycle on the st…
How do you replace the levers of the Honda CBR 600 RR?
How do you replace the levers of the Honda CBR 600 RR?
Cbr 600 Rr To replace the levers of the Honda CBR 600 RR, you need to loosen the screws that fix the calipers to their housings on the sides of the handlebars: …
How to replace the spark plugs of the Honda CBR 600 RR
How to replace the spark plugs of the Honda CBR 600 RR
Cbr 600 Rr In this guide we will see the main instructions on how to disassemble and replace the spark plugs of the engine of the Honda CBR 600 RR motorcycle. F…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos