Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil on the Honda CB500X

Model: Honda Cb500x
Part: Engine oil

Video tutorial

This guide shows how to change the engine oil on the Honda CB500X. After securing the vehicle, remove the drain bolt with a 12 mm spanner located at the bottom of the vehicle and allow the fluid to drain into a suitable container; at this stage, remove the filler cap to allow the fluid to drain more quickly.

Once the drain plug is closed, remove the oil filter located at the front of the engine; allow any residual oil to drain into a container.

Install the new filter after lubricating the seal and tighten it in place. Fill the oil reservoir to the correct level and start the engine for a few minutes.

Check the lubricant level again and top up if necessary.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

Cb500x In this tutorial we can see how to replace the motor oil in the Honda CB500X, an extremely simple and fast operation. First of all, make sure that th…
Cb500x In this tutorial, you will see how to change the engine oil in a Honda CB500X, a very simple and quick operation. First, ensure that the engine is su…
Cb500x In this tutorial, we will see how to replace the headlight bulb on the Honda CB500X, an extremely simple and quick operation. First of all, let's mak…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Exhaust on a Triumph Bobber

To replace the exhaust on a Triumph Bobber, loosen the screws that secure it to the brackets on the right side of the bike. Once the mounting screws are loosened, proceed to expand the clamp that connects the exhaust to the remaining exhaust pipe. This will allow you to completely remove the old exhaust from its housing and insert the new one. The new exhaust must be secured in place by inserting the locking ring and fastening it to the appropriate brackets.

Watch the video!


by ScegliAuto

More videos