Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Supremo 150
In this tutorial, see how to replace the headlight bulb on the Honda Supremo 150, a straightforward and quick task. First, ensure the key is not inserted. Next, locate the screws at the rear of the headlamp and, using a simple cross-head screwdriver, unscrew both. Then, separate the lamp from the frame, disconnect the power connector, and remove the large rubber cap. At this point, release the metal clip, extract the old bulb, insert the replacement, and reassemble everything.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Honda SH 150 Scooter
How to Replace the Front Headlamp Bulb on a Honda SH 150 Scooter
Sh 150 Replacing the front headlamp bulb on a Honda SH 150 scooter is an extremely simple and quick task. First, ensure the key is not in the ignition. Then…
Replacing the Headlight Bulb on a Ford F-150
Replacing the Headlight Bulb on a Ford F-150
Ford F-150 (2009-2014 / MK 12) In this guide, learn how to remove and replace the headlight bulb on a Ford F-150 in simple and quick steps. First, open the hood and start by removi…
How to Replace the Fog Light on a Ford F-150
How to Replace the Fog Light on a Ford F-150
Ford F-150 (2015-2020 / MK 13) To replace the fog light on a Ford F-150, access the inside of the bumper to disconnect the connector attached to the bulb. This will allow you to re…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos