Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on a Ford F-150

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Headlight bulb

In this guide, learn how to remove and replace the headlight bulb on a Ford F-150 in simple and quick steps. First, open the hood and start by removing the top screws of the headlight housing using a 10 mm socket wrench; then gently remove the headlight by disconnecting the electrical connector of the bulb. At this point, remove the rubber cover of the bulb to take it out and replace it with a new one of the correct type; insert it properly into the housing and reassemble the headlight!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Taillights on a Ford F-150 Pickup?
How to Replace the Taillights on a Ford F-150 Pickup?
Ford F-150 (2015-2020 / MK 13) As seen in this tutorial, replacing the taillights on a Ford F-150 pickup is a very simple and quick operation. First, open the tailgate, then locate…
How to Replace the Fog Light on a Ford F-150
How to Replace the Fog Light on a Ford F-150
Ford F-150 (2015-2020 / MK 13) To replace the fog light on a Ford F-150, access the inside of the bumper to disconnect the connector attached to the bulb. This will allow you to re…
How to replace the front headlight bulb of the Ford F 150
How to replace the front headlight bulb of the Ford F 150
Ford F-150 (2015-2020 / MK 13) To replace the headlight bulb of the left front headlight of the 2018 Ford F 150, we need to open the front hood so that light enters the hood and re…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos