Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. F-150
    4. : How to replace the front bulbs in the Ford F-150

Ford F-150 - Video tutorial

Model: Ford F-150 MK 11 - Years 2004-2008
Part: Light bulb
Operation: How to replace the front bulbs in the Ford F-150

In today's video we will see how to replace the front bulbs of the Ford F-150. First we open the front hood. We remove the plastic bulkhead and proceed to remove the fixing screws of the headlights. At this point we extract the cap, paying attention to the removal of the bulbs. If necessary, then remove the complete headlight otherwise only intervene on the necessary bulb, following the manufacturer's instructions regarding the type of light bulbs. Finally, proceed to reinsert the parts according to the initial composition.


Posted on 19 May 2024 by ScegliAuto



How to remove the headlight of the Ford F-150
Ford F-150 (2009-2014 / MK 12) Let's see in today's video how to remove the headlight of the Ford F-150. First we open the front hood. Now remove the bulkhead located between the h
Replace the rear light assembly of the Ford F-150 MK12
Ford F-150 (2009-2014 / MK 12) Today we will see, in this video tutorial, how to remove and replace the rear light of the Ford F-150 in its twelfth generation, in simple and quick
How to replace the rear lights on the Ford F-150 pickup truck?
Ford F-150 (2015-2020 / MK 13) As we can see in this tutorial, replacing the rear lights on the Ford F-150 pick-up truck is an extremely simple and fast operation. To do this, we w

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos