Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight on a Ford F-150

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Headlight

In today's video, we will see how to remove the front headlight on a Ford F-150. First, open the hood. Now remove the cover between the headlight and the front by unscrewing the mounting screws. Next, unscrew the bolts that hold the headlight to the frame support structure. Apply pressure and pull off the housing. Now disconnect the power connectors located at the back. If necessary, replace any burnt-out bulbs, and then reinstall the headlight in its original position by following the previous steps.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlights on the Ford F-150 MK11
Replacing the Headlights on the Ford F-150 MK11
Ford F-150 (2004-2008 / MK 11) In this video tutorial, you will learn how to remove and replace the headlights on the Ford F-150 eleventh generation. First, open the hood and start…
How to Replace the Fog Light on a Ford F-150
How to Replace the Fog Light on a Ford F-150
Ford F-150 (2015-2020 / MK 13) To replace the fog light on a Ford F-150, access the inside of the bumper to disconnect the connector attached to the bulb. This will allow you to re…
How to Replace the Front Bulbs in a Ford F-150
How to Replace the Front Bulbs in a Ford F-150
Ford F-150 (2004-2008 / MK 11) In today's video, you will learn how to replace the front bulbs in a Ford F-150. First, open the hood. Remove the plastic cover and proceed to take o…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos