Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Rear Light Assembly on the Ford F-150 MK12

Model: Ford F-150 MK 12 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

Today, you will learn how to remove and replace the rear light on the Ford F-150 in its twelfth generation in simple and quick steps. First, open the tailgate and start by removing the fastening screws located on the sides using a socket wrench; then gently remove the light assembly by disconnecting the bulb electrical connector, as shown in the video.

At this point, remove and replace the bulbs if necessary, or replace the entire light assembly; then reassemble everything by following the reverse procedure!


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Ford F-150 Mk12
How to Remove the Radio from a Ford F-150 Mk12
Ford F-150 (2009-2014 / MK 12) .. shows how to remove the radio from a Ford F-150 Mk12. From the bottom of the radio console, disconnect the alarm LED and unscrew the 7 mm bolt. From.. …
How to reset the service light on the Ford F-150 MK12
How to reset the service light on the Ford F-150 MK12
Ford F-150 (2009-2014 / MK 12) In this video we see how to reset the service light, after having carried out all the work related to the service, on a 2013 Ford F-150, so a MK12: w…
How to Replace the Rear Headlight Bulb on a Ford F-150
How to Replace the Rear Headlight Bulb on a Ford F-150
Ford F-150 (2009-2014 / MK 12) In this guide, discover the steps to properly and safely replace the rear headlight bulb. First, park the vehicle on a flat surface, then turn it off…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos