Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Ford F-150 Mk12

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Car stereo

This guide shows how to remove the radio from a Ford F-150 Mk12. From the bottom of the radio console, disconnect the alarm LED and unscrew the 7 mm bolt. From the top, remove the two 7 mm bolts. Using a plastic trim tool, remove the two side covers of the console to free the radio assembly. At this point, pull the radio out, starting from the top; be careful of the electrical connectors. Now you can remove the four 7 mm bolts that hold the radio module in place. Pull out the unit to complete the removal.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Ford F150
How to Reset the Service Light on Ford F150
Ford F-150 (2009-2014 / MK 12) In this video tutorial, you can see how to reset the service light on a Ford F150 by following simple steps that will guide you to properly manage yo…
Location of the Fuse Box in the Ford F150
Location of the Fuse Box in the Ford F150
Ford F-150 (2009-2014 / MK 12) When troubleshooting the electrical system of the Ford F150, you need to know the location of the fuse boxes to perform necessary checks and replace …
How to replace the fog light bulb on a Ford F150
How to replace the fog light bulb on a Ford F150
Ford F-150 (2009-2014 / MK 12) In this video, we will see how to replace the fog light bulb on a Ford F150: we will easily access it from the front wheel well, which we will have t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos