Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the battery for a Ford F150 key.

Model: Ford F-150 MK 12 - Years 2009-2014
Part: Key

Today we will see how to change the battery of a Ford F150 key, model produced from 2011 to 2014. This operation is very simple to perform and we can do it independently in just a few seconds, but let's see how to do it right away. First, we need to open the remote control, to do this we just need to insert a small slotted screwdriver, or even a small coin as shown in the video, into the appropriate slot on the side of the key and then press to open the remote control. Once we have done this, we can immediately remove the old battery and insert a new one with the positive pole facing upwards, finally we close everything to complete the job.

Posted on 29 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the BMS of the Ford F150
Resetting the BMS of the Ford F150
Ford F-150 (2021-2026 / MK 14) In this video, we see how, after replacing the battery of the Ford F150, it is good practice to reset the BMS system, which is responsible for monito…
How to Change the Key Fob Battery on a Ford F150
How to Change the Key Fob Battery on a Ford F150
Ford F-150 (2015-2020 / MK 13) In this tutorial, you will learn how to replace the dead battery in the remote key fob for a Ford F150. Take your key fob and open it. You will see a…
How to Replace the Key Fob Battery for the Ford F150
How to Replace the Key Fob Battery for the Ford F150
Ford F-150 (2021-2026 / MK 14) This video tutorial shows the procedure to replace the key fob battery for the Ford F150. First, remove the emergency key by pressing the button loca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos