Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery for the Ford F150

Model: Ford F-150 MK 14 - Years 2021-2026
Part: Key

This video tutorial shows the procedure to replace the key fob battery for the Ford F150. First, remove the emergency key by pressing the button located at the bottom of the fob and pulling it downward. After this, use the emergency key to pry open the slot at the bottom, towards the side of the fob, to remove the cover. Once the cover is removed, you will have access to the battery. Simply remove it and insert the new CR2450 battery, then press down with your fingers to reinsert the cover and finally reinsert the emergency key.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Key Fob Battery on a Ford F150
How to Change the Key Fob Battery on a Ford F150
Ford F-150 (2015-2020 / MK 13) In this tutorial, you will learn how to replace the dead battery in the remote key fob for a Ford F150. Take your key fob and open it. You will see a…
How to Replace the Remote Battery for the Ford F150
How to Replace the Remote Battery for the Ford F150
Ford F-150 (2015-2020 / MK 13) In this video tutorial, see how to replace the battery in the Ford F150 remote by following a few simple steps: first, purchase a CR2032 3 Volt batte…
Replacement of the battery for a Ford F150 key.
Replacement of the battery for a Ford F150 key.
Ford F-150 (2009-2014 / MK 12) Today we will see how to change the battery of a Ford F150 key, model produced from 2011 to 2014. This operation is very simple to perform and we can…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos