Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the remote control of the Ford F150 MK11 version

Model: Ford F-150 MK 11 - Years 2004-2008
Part: Key

In this video we see how to program the remote control of the Ford F150 MK 11 version, more specifically a 2007 version: we must hold the remote control to be programmed and turn the key in the ignition eight times; at this point we will hear the locks of the external doors closing and then opening, in sequence. Now we press the lock button on the remote control. We remove the key from the dashboard and the operation is complete. We can try to open and close the doors with the remote control we have programmed and see that it works perfectly, just like the other one.

Posted on 25 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a 2008 Ford F150
How to Replace the Cabin Air Filter on a 2008 Ford F150
Ford F-150 (2004-2008 / MK 11) Follow the steps in this guide to easily replace the cabin air filter in your 2008 Ford F150. First, ensure the vehicle is parked on a level surface,…
How to Replace the Remote Battery for the Ford F150
How to Replace the Remote Battery for the Ford F150
Ford F-150 (2015-2020 / MK 13) In this video tutorial, see how to replace the battery in the Ford F150 remote by following a few simple steps: first, purchase a CR2032 3 Volt batte…
How to Change the Key Fob Battery on a Ford F150
How to Change the Key Fob Battery on a Ford F150
Ford F-150 (2015-2020 / MK 13) In this tutorial, you will learn how to replace the dead battery in the remote key fob for a Ford F150. Take your key fob and open it. You will see a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos