Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. F-150
    4. : How to program a new remote control in the Ford F-150 pickup?

Ford F-150 - Video tutorial

Model: Ford F-150 MK 11 - Years 2004-2008
Part: Key
Operation: How to program a new remote control in the Ford F-150 pickup?

In this tutorial we can see how to program a new remote control in the Ford F-150 pickup, very simple operation. We start by going inside the passenger compartment, after which we leave the driver's door open, insert the key and turn on the ignition 8 consecutive times, then leaving it on. Once this is done, press the lock release button both on the remote control to be programmed and on the others already programmed, otherwise it will no longer be possible to use them. Finally, we remove the key from the panel and test the correct functioning of each remote control.


Posted on 23 September 2022 by ScegliAuto



How to program a new remote control for the Ford F-150 pick-up truck?
Ford F-150 (2015-2020 / MK 13) .. In this tutorial, we can see how to program a new remote control in the Ford F-150 pickup truck, a very simple and fast operation...
How to program a new remote control for the Ford F-150 pick-up?
Ford F-150 (2015-2020 / MK 13) .. to program a new remote control for the Ford F-150 pickup truck, a very simple and fast operation. To do this, we will need two already functioning..
How to replace the battery in the remote control of the Ford F-150 pickup?
Ford F-150 (2015-2020 / MK 13) .. can see in this tutorial, replacing the Ford F-150 pickup remote control battery is a very quick and easy operation. To do this, we will need a small..

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos