Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Changing the transmission oil on a Honda Dio scooter, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, wait for the engine to cool sufficiently to operate safely. Start by positioning a container beneath the rear area of the casing, then locate the lower bolt and undo it with a 12 mm spanner. Allow all the oil in the system to drain out, then tighten the bolt and undo the upper one, using the corresponding hole to add the new oil.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Honda Dio scooter?
How to replace the engine oil in the Honda Dio scooter?
Dio In this tutorial, we can see how to replace the engine oil in the Honda Dio scooter, an extremely simple and quick operation. First of all, we wait f…
How to replace the engine oil in the Honda Dio scooter?
How to replace the engine oil in the Honda Dio scooter?
Dio In this tutorial we can see how to replace the engine oil in the Honda Dio scooter, an extremely simple and quick operation, to be carried out every …
How to Change the Engine Oil in the Honda Dio Scooter?
How to Change the Engine Oil in the Honda Dio Scooter?
Dio In this tutorial, see how to change the engine oil in the Honda Dio scooter, a very simple and quick operation to be performed every 12 months. First…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos