|
Do it yourself
| |||
| ||||
Model: Honda Nhx 110
To change the engine oil on a Honda NHX 110, loosen the drain plug of the oil tank located at the central bottom of the bike. Once this plug is removed, collect the used oil in a suitably positioned container. At this point, you can also remove the oil filter located in the same position; then, top up the oil. This can be done by adding the necessary amount of oil through the filler located on the right side of the bike, just above the exhaust.
Updated on 2 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Nhx 110
To replace the clutch on the Honda NHX 110, loosen the screws securing the transmission cover located on the left side of the bike near the rear whee…
Nhx 110
In order to replace the muffler of the Honda NHX 110, you need to loosen the screws that secure the exhaust terminal to its housing, which is located…
Nhx 110
To replace the variator on the Honda NHX 110, loosen the screws securing the cover near the rear wheel of the bike, allowing the cover to be removed …
|
How to replace the engine oil in the Kawasaki Versys 1000?
As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |