|
Do it yourself
| |||
| ||||
Model: Honda Pcx 125
This tutorial shows how to replace the brake lever on a Honda PCX 125 scooter, a very simple and quick operation. First, position yourself in front of the brake in question, then locate the fastening bolt of the lever. Grip the lower nut with a spanner or pliers and fully unscrew it. Next, separate the lever from the support, position the replacement part, and firmly screw the bolt back in. If necessary, check the level of the brake fluid and ensure that the new lever can compress the piston correctly.
Updated on 6 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Pcx 125
Today's main steps will show us how to disassemble and replace the front tire of the Honda PCX 125 scooter. First, we put the scooter on the center s…
Pcx 125
In this tutorial, you will learn how to replace the front brake pads on a Honda PCX 125 scooter, a very simple and quick operation. First, position y…
Pcx 125
Today's guide will show you how to remove and replace the drive belt on the Honda PCX 125 scooter, following the instructions below. First, place you…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
