Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
If the service light on your Honda Forza is illuminated continuously despite having completed the service, do not worry as you can easily reset it manually. First, place your Honda Forza on the stand and ensure it is switched off. Next, locate the two buttons on the left-hand dial and press them simultaneously. Then, turn on the ignition and wait a few seconds. Once the reset of the light is successfully completed, release both buttons and the procedure is finally finished.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Honda Forza
How to Reset the Service Light on the Honda Forza
Forza To manually reset the service light on your Honda Forza, follow these simple steps. First, ensure the Honda Forza is completely off. Then locate the …
How to Reset the Service Light on a Honda Forza
How to Reset the Service Light on a Honda Forza
Forza To reset the service light on a Honda Forza, press and hold the INFO A button located on the left side of the steering wheel: while continuing to hol…
How to Reset the Oil Light on the Honda Forza 300
How to Reset the Oil Light on the Honda Forza 300
Forza To reset the oil light on the Honda Forza 300, follow this procedure: first, turn off the engine. Once the engine is off, press and hold the right bu…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos