Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Start the Honda ADV 150 Correctly

Model: Honda Adv 150
Part: Key

Video tutorial

In this video, see how to start the Honda ADV 150. For those unfamiliar, starting this vehicle for the first time can be a bit tricky. It comes with keyless ignition: the top button helps you find your bike, which is very useful if you're in a shopping centre with hundreds of other bikes; the central button helps disable the alarm if it has been activated, while the bottom button is for locking or unlocking the bike.

If I hold it down, the LED light turns red and I cannot start the vehicle. But if I hold it down again, it turns green and then the key turns.

If I turn the key to the left once, I can open the compartment under the seat and unlock the fuel cap. If I turn the key again, I must also pull the left brake lever, and only then can I press the start button. To turn off, I must return the key to '0', but this will not turn off the bike; it will only drain the battery.

You need to turn the handlebars where you see the padlock. Only then will the bike be truly off.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on the Honda ADV 150
Adv 150 To replace the exhaust on the Honda ADV 150, you need to loosen the screws that secure the exhaust tip to its housing. Once the screws are loosened, …
How to Replace the Air Filter on the Honda ADV 150
How to Replace the Air Filter on the Honda ADV 150
Adv 150 To replace the air filter on the Honda ADV 150, loosen the screws securing the cover of the casing near the rear wheel, above the transmission casing…
How to Replace the Battery in a Honda ADV 150 Scooter?
How to Replace the Battery in a Honda ADV 150 Scooter?
Adv 150 In this tutorial, you will see how to replace the battery in a Honda ADV 150 scooter, an extremely simple and quick operation. First, ensure that the…

How to Change the Engine Oil of a Triumph Speed 400?

To change the engine oil of a Triumph Speed 400, start by positioning the bike on a flat surface and ensure the engine is warm but not too hot. Locate the oil filler cap on the engine and unscrew it. Place a collection container under the oil drain plug on the oil sump and unscrew the plug to allow the used oil to drain out. Once the draining is complete, refit the drain plug. Remove and replace the oil filter using an oil filter wrench. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the filler cap opening until it reaches the recommended level, and you will have completed the change.

Watch the video!


by ScegliAuto

More videos