|
Do it yourself
| |||
| ||||
Replacing Climate Control Switches
Model: Honda Civic
MK 6
- Years:
1995, 1996, 1997, 1998, 1999, 2000, 2001
Video tutorial
Unclip and remove the glove compartment beneath the centre console by disconnecting the cigarette lighter connector. Unscrew the screws securing the upper bracket. Using a plastic lever, unclip the centre console with the climate control switches and pull it forward to detach it from its housing, disconnecting all connectors. Then, unscrew the 3 screws securing the climate control switches on the left side, remove the knobs from the front, and extract the switches. Replace them with the new ones, tightening the respective securing screws and reapplying the adjustment knobs (replace the backlight bulbs if necessary). Reposition the console in its housing, reconnect all connectors, press it until it clicks into place, screw in the two lower securing screws previously removed, and reapply the glove compartment.
Updated on 3 February 2026 by ScegliAuto
Related tutorials
Honda Civic
(1995-2001 /
MK 6)
In this video tutorial, you will learn how to remove and replace the bulbs for the air conditioning controls on a second-generation Honda Civic. Firs…
Honda Civic
(2012-2015 /
MK 9)
In this short and simple guide, you will learn how to remove and replace the factory stereo of the 2014 Honda Civic 9 in a few easy steps. First, get…
Honda Civic
(2016-2021 /
MK 10)
Today's guide will show you how to remove and replace the standard radio in a Honda Civic, following the instructions below. First, get inside the ve…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |